Authors

Modeling of working processes in low-speed reciprocating compressors of compact refrigeration units

DOI: 10.17586/1606-4313-2023-22-4-22-27
UDC 621.574

Modeling of working processes in low-speed reciprocating compressors of compact refrigeration units

Busarov Sergey S., Nedovenchany Aleksey V., Kapelyukhovskaya Aleksandra A.

For citation: Busarov S.S., Nedovenchany A.V., Kapeluxovskaya A.A. Modeling of working processes in low-speed reciprocating compressors of compact refrigeration units. Journal of International Academy of Refrigeration. 2023. No 4. p. 22-27. DOI: 10.17586/1606-4313-2023-22-4-22-27

Abstract
The paper concerns the problem of creating compact refrigerating machines in which, due to the peculiarities of the compression mode in the compressor, the load on the condenser is significantly reduced. Previous studies on carbon dioxide showed the possibility of a low-speed compressor operating in the area of wet steam during compression. The accumulated modeling experience allowed obtaining data on the temperature of the compressor wall and, for existing dependencies describing the condensation process, obtaining data on the operation of a low-speed compressor in a refrigeration machine when running on carbon dioxide. At the same time, they were obtained both with complete condensation of the working fluid and in the absence of condensation, but at temperatures close to condensation temperatures. Taking into account the specifics of the operation of low-speed compressors, namely the possibility of obtaining large values of the pressure-to-discharge pressure ratio, the integral characteristics of the compressor were obtained with a pressure ratio in the stage equal to 5.7, which showed a significant superiority in this indicator over existing compressors. Further research is aimed at conducting experimental studies and verifying the presented calculation model.

Keywords: low-speed compressor, condensation in the working chamber, working process, critical pressure, critical temperature, refrigerating machine, condenser, mathematical model.

All references

1. Yusha V.L., Busarov S.S. Prospects for creating low-flow compressor units of medium and high pressure on the basis of unified low-speed long-stroke stages. Scientific and technical bulletin of SPbPU. Natural and engineering sciences. 2018. Vol. 24. No. 4. pp. 80-89. DOI: 10.18721/JEST.24408. (in Russian)

2. Busarov S.S., YushaV.L., NedovenchanyiA.V. Experimental Evaluation of the Efficiency of Long-Stroke, Low-Speed Reciprocating Compressor Stages in Compression of Different Gases. Chemical and Petroleum Engineering. 2018. Vol. 54(4). Iss. 7-8. P. 593-597. DOI: 10.1007/s10556-018-0520-1.

3. Patent 2694104 Russian Federation, IPC F25B 1/00. The refrigerating machine and the way it works / Yusha V.L. No. 2022103679, application No. 14.02.2022; publ. 02.02.2023. Byul. No. 4. (in Russian)

4. Busarov S.S. Evaluation of the efficiency of steam compression refrigerating machines with quasi-isothermal compression of natural refrigerants / Busarov S.S., Yusha V.L., Sukhov E.V. Kazakhstan-Kholod 2018: collection of dokl. international scientific-technical. conf. Almaty: ATU, 2018. pp. 210-215. (in Russian)

5. Busarov S.S. Theoretical analysis of the effectiveness of the use of quasi-isothermal compression of natural refrigerants / Busarov S.S., Yusha V.L., Sukhov E.V. VIII International Scientific and Technical Conf. "Low-temperature and food technologies in the XXI century" (St. Petersburg, November 15-17, 2017): St. Petersburg: ITMO University, 2017. pp. 23-27. (in Russian)

6. Strommen I., Bredesen A.M. et al. Refrigeration units, air conditioners and heat pumps for the XXI century. Refrigeration business. 2000. No. 5. pp. 8-10. (in Russian)

7. Voronov V.A., Leonov V.P., Rosenoer T.M. Two-stage refrigeration cycle with a carbon dioxide expander. Engineering Journal: Science and Innovation. 2013. No. 1. (in Russian)

8. Busarov. S.S., Yusha V.L., Filkin N.Yu., Fedorova M.A., Denisenko V.V., Goncharenko A.A., Shipov V.B., Bessonov O.G. Implementing the principles of operating processes schematization and of performance losses distribution when designing long-stroke reciprocating compressor stages. 12th International Conference on Compressors and their Systems City, University of London, 6-8 September 2021, p. 1-11. DOI: 10.1088/1757-899X/1180/1/012016

9. Chrustalev B.S., Zdalinsky V.B., Bulanov V.P. Mathematical model of reciprocating compressor with one or several stages for the real gases. International Compressor Engineering Conference. 1996. P. 1108. http://docs.lib.purdue.edu/icec/1108.

10. Frenkel M.I. Reciprocating compressors. Theory, constructions and fundamentals of design. 3rd ed., reprint. and additional L.: Mechanical Engineering, 1969. 744 p. (in Russian)

11. Busarov S.S., NedovenchanyiA.V., YushaV.L. Experimental evaluation of the efficiency of long-stroke, low-speed reciprocating compressor stages in compression of different gases. Chemical and Petroleum Engineering. 2018. Vol. 54. pp 593-597.

12. Borishansky V.M. et al. Heat transfer to two-phase flow. Thermal power engineering. 1969. No. 5. pp. 58-61.(in Russian)

13. Kishalov A.E., Zinnatullin A.A. Mathematical modeling of condensation of a working fluid in a heat transfer system to a cold source of a low-power power plant. Bulletin of Irkutsk State Technical University. 2019. Vol. 23. No. 5. pp. 934-949.https://doi.org/10.21285/1814-3520-2019-5-934-949.(in Russian)

14. Kishalov A.E., Zinnatullin A.A. Thermal calculation of the horizontal pipeline taking into account the condensation of the coolant. Technical sciences: theory and practice: mater. IV International Scientific Conference 2018 (Kazan, November 20-23, 2018). Kazan: Young Scientist, 2018. pp. 27-32. (in Russian)

15. Kishalov A.E., Zinnatullin A.A. Numerical simulation of coolant condensation in a horizontal pipeline. Bulletin of the Voronezh State Technical University. 2019. Vol. 15. No. 2. C. 42-50. https://doi.org/10.25987/VSTU.2019.15.2.005. (in Russian)

16. Malyshev A.A., Malinina O.S., Kalimjanov D.E., Sukhov P.S., Kuadio K.F. Comparative analysis of thermal exchange calculation for refrigerants boiling in channels. Journal of International Academy of Refrigeration. 2020. No 1. p. 34-39. (in Russian)