Authors

Scroll compressors capacity

UDC 621.5.041

Scroll compressors capacity

Kosachevsky V. A.

Abstract
The article describes the market appearance of scroll compressors, the market analysis is made, advantages of scroll compressors over other types of compressors are discussed, operating principle of scroll compressors is described, compressor capacity depending of its geometry and the system of spiral elements is analyzed, the fields of compressor application is shown. The capacity of the compressor is analyzed in terms of simplified operational model based on conventional ratios for an ideal gas. Calculation results according to a more complex model taking into account gas leakage inside scroll compressor are analyzed. The obtained results for both models are compared. The influence of spiral parameters on the compressor capacity is evaluated based on the analysis data. The influence of gas leakages inside the compressor on its capacity is analyzed. Their prevalent role in calculating design capacity is highlighted. The design characteristics of the compressor with the use of the developed operating process model are compared with the experimentally observed characteristics of compressors made in Russia and abroad. The newest examples of scroll compressor design with variable geometry are given.

Keywords: scroll compressors, the market of scroll compressors, geometry of scroll compressor elements, scroll compressor operating model, gas leakages, compressor efficiency.

All references

1. Kochetova G.S., Sakun I.A. State and direction of development of spiral compressors. Moscow, 1988.(in Russian)

2. Bupdanov N.G., Kanyshev G.A. Spiral compressors for refrigerators. Moscow, 1991.(in Russian)

3. Elagin M.Yu., Sakun I.A. Mathematical modeling of non-stationary processes in the spiral refrigerating compressor. Increase in process performance of cooling machineries and installations of low-potential power. Collection of scientific works.St. Petersburg,1992. p. 29.(in Russian)

4. Kosachevskii V.A., Sysoev V.L. To a question of a method of calculation of a form of a working element of the spiral compressor. Increase of process performance of cooling machineries and installations of low-potential power. Collection of scientific works. St. Petersburg,1992. p. 39.(in Russian) (in Russian)

5. Karpukhin G.V., Sakun I.A. Creation of configurations of working elements of the spiral compressor. Kompressornaya tekhnika i pnevmatika. 1994. No 4-5. p. 45.(in Russian)

6. Kosachevskii V.A. About geometry of working elements of the spiral compressor. Kompressornaya tekhnika i pnevmatika. 1994. No 4-5. p. 49.(in Russian)

7. Kosachevskii V.A. About mathematical model of working process of the spiral compressor. Kompressornaya tekhnika i pnevmatika. 1997. No 1-2 (14-15). p. 40.(in Russian)

8. Kosachevskii V.A., Fotin B.S., Seleznev K.P. About mathematical model of the spiral compressor. Theses of reports of the XI international scientific and technical conference on the compressor equipment. Kazan', 1998. p. 84.(in Russian)

9. Vernyi A.L., Ibragimov E.R., Ibragimov N.B., Nalimov V.N., Khisameev I.G. Results of testing of a model sample of the spiral compressor. Kompressornaya tekhnika i pnevmatika, 1996, No 1-2(10-11). p. 70.(in Russian)

10. Vernyi A.L., Ibragimov E.R., Ibragimov N.B., Nalimov V.N., Khisameev I.G. The automated refrigeration unit with the spiral compressor. The report at a seminar "Scientific and technical and production problems of a refrigerating kompressorostroyeniye", 9-10 okt. 1997, St. Petersburg, 1997.(in Russian)

11. Efremov S.N. The analysis перетечек coolant in spiral refrigerating compressors. Vestnik SevGTU. Seriya: Mekhanika, energetika, ekologiya. 2008. No 87. p. 107-110.(in Russian)

12. Efremov S.N., Shestakovich I.A. Profile calculation of the forming spirals of the refrigerating compressor. Vestnik SevGTU. Seriya: Mekhanika, energetika, ekologiya. 2005. No 67. p. 148-153.(in Russian)

13. Kuznetsov L.G., Molodova Yu.I., Prilutskii A.I. Increase in hermeticity of piston compressors and detander. Kholodil'naya tekhnika. 1999. No 9. p. 24-25.(in Russian)

14. Fotin B.S. Working processes of volume compressors. Education guidance. Leningrad, 1986.(in Russian)

15. Creux Léon, Rotary engine, Patent of the USA No 801182, 1905.

16. Uchikawa N.,Terada H., Arata T. Scroll compressors for air conditioners. Hitachi Rev., 1987, 36, No 3, p. 155.

17. Hiraga M., Sakaki M., Shimizu S., Mabe A., Tsukagosi Y., Terauchi K. Scroll compressors for vehicle air conditioning. Refrigeration, 1987, v. 62, No 720, p.1106.

18. High efficiency and lightweight railway vehicle air conditioners using inverterdriven scroll compressors. Hitachi Rev., 1988, v. 37, No 6, p. 427.

19. Remy Cecile. Comment Maneurope industrialise sou nouveau compresseur. Ind. et Techn., 1992, No 732, p. 56.

20. Nuova generazione di Scroll. Cond. aria riscaldamento refrig., 1995, 39, No 4, p. 335.

21. Hydraulic and pneumatic systems. [Electronic resource] http://www.hydro-pnevmo.ru, 2016.

Read the full article