Authors

On the cut-off angle for the wraps of scroll compressors An analytical approach

DOI: 10.17586/1606-4313-2020-19-2-26-30
UDC 621.5.041

On the cut-off angle for the wraps of scroll compressors An analytical approach

Kosachevsky V. A.

For citation: Kosachevsky V.A. On the cut-off angle for the wraps of scroll compressors. An analytical approach. Vestnik Mezhdunarodnoi akademii kholoda. 2020. No 2. p.26-30

Abstract
The article analyzes different approaches to the modelling of scroll compressor central part. They are compared in terms of different operation principles used for scroll machines. The schemes of spiral cut-off are analyzed. The concept minimal critical angle for spiral cut-off is introduced and substantiated. The technique of the angle estimation, based on the equations for intrados of scroll machine working tool, is suggested. The relevance of correct estimation for the lower boundary of the cut-off angle for wraps in scroll machines designing is emphasized. The technique described is suggested for the purpose.

Keywords: scroll compressors, scroll machines, fields of application, scroll machine geometry, modeling of central part, scroll wraps conjugation, cut-off angle for wrap, minimum cut-off angle criterion.

All references

1. Kosachevsky V.A. about the geometry of the working elements of a spiral compressor. Compressor Equipment and Pneumatics. 1994. no. 4-5, p. 49. (in Russian)

2. Kosachevsky V. A. on the mathematical model of the working process of a spiral compressor. Compressor Equipment and Pneumatics. 1997. no. 1-2 (14-15), p.40. (in Russian)

3. Kosachevsky V.A. About the performance of a spiral compressor. Vestnik Mezhdunarodnoi akademii kholoda. 2016, No. 4. p. 40-46. (in Russian)

4. Ivlev V.I., Misyurin S.Yu. Calculation and experimental characteristics of a spiral machine operating in the gas motor mode. Reports of the Academy of Sciences. 2017. Vol. 472, no. 3, pp. 278-281. (in Russian)

5. Orosz Matthew S., Mueller Amy V., Dechesne Bertrand J., Hemond Harold F. Geometric design of scroll expanders optimized for small organic Rankine cycle. ASME Journal of engineering for gas turbines and power, 135(04), April 2013.

6. Accorsi Felipe A., James Nelson A., Groll Eckhard., Horton William T., Braun James E.Experimental Testing and Modeling of 5 kW Oil-Free Open Drive Scroll Expander Using R245fa. Proc.ICEC at Purdue Univ., 2016,P. 2482.

7. Hesse Jan, Andres Rainer. CFD Simulation of a Dry Scroll Vacuum Pump Including Leakage Flows. Proc. ICEC at Purdue Univ., 2016, р. 11-14.

8. Efremov S.N., Shestakovich I.A. Thermodynamic calculation of a spiral refrigerating air conditioning compressor. Bulletin SevGTU. Series "Mechanics, energy, ecology". 2006. Issue 75. Pp. 154-158. (in Russian)

9. Efremov S.N. The analysis of the leakages of the refrigerant in the scroll refrigeration compressors. Bulletin SevGTU. Series "Mechanics, energy, ecology". 2008. Issue 87. Pp. 107-110. (in Russian)

10. Efremov S.N., Shestakovich I.A. Profile calculation of forming coils of a refrigerating compressor. Bulletin SevGTU. Series "Mechanics, energy, ecology". 2005. Issue 67. Pp. 148-153. (in Russian)

11. Gravesen J. & Henriksen C. The Geometry of the Scroll Compressor. Society for Industrial and Applied Mathematics. 2001. Vol. 43, pp. 113-126.

12. Bukac Hubert. The theory of scroll profile. Proc. ICEC at Purdue Univ.,2006, p. 1747.

13. Bell I., Groll E.A., Braun J.E., King G. Update on scroll compressor chamber geometry.Proc. ICEC at Purdue Univ.2010. July 12-15.р. 1. 1489.

14. Kosachevsky V.A. On the cut-off angle for the scroll compressor wrap. Vestnik Mezhdunarodnoi akademii kholoda. 2019. No 4. p.37-41.(in Russian)

15. Kosachevsky V.A. Modelling the central part of the scroll compressors. Vestnik Mezhdunarodnoi akademii kholoda. 2018. No 3. p. 45-52.(in Russian)

Read the full article