Authors

Model for diagnosing SKAB-7.5 on the basis of the vector for its diagnosing parameters

UDC 62-192:621.512.3

Model for diagnosing SKAB-7.5 on the basis of the vector for its diagnosing parameters

Oskoma Anatoly A., Anatoly G. Surikov

For citation: Oskoma A.A., Surikov D.G. Model for diagnosing SKAB-7.5 on the basis of the vector for its diagnosing parameters Journal of International Academy of Refrigeration. 2021. No 4. p. 30-37. DOI: 10.17586/1606-4313-2021-20-4-30-37

Abstract
The article describes a statistical research on the designing a model for diagnosing SKAB-7.5 automatic compressor plant. The coefficients of Fourier series have been decided to be used as diagnosing parameters. Those coefficients have been obtained by decomposition of actual indicator diagrams for the stages of SKAB-7.5 five-stage reciprocating air compressor in Fourier series. Modeling the faults at the experimental stand has been made on the basis of statistical analysis of the reciprocating compressors’ faults which were detected aboard fishing fleet and Navy ships. On the basis of the research indicator diagrams for any stage of reciprocating air compressor at general faults have been obtained.

Keywords: indictor diagram, Fourier series, diagnosing model, reciprocating compressor, compressor faults, auxiliary machinery reliability, diagnosing parameters.

All references

1. State standard R 56243-2014. Inland waterway transport. Ship safety management system. Requirements for ensuring the reliability of mechanisms. 2014.(in Russian)

2. Oskoma A.A. Diagnostics of reciprocating compressors of marine compressed air systems based on a time analysis of their indicator diagrams. In the book: Information technologies in transport and stationary power engineering. St. Petersburg: St. Petersburg Engineering Academy, 1998. 5 p.(in Russian)

3. Myasnikov Yu.N. Interdisciplinary innovative technologies in shipbuilding. Proceedings of the Krylov State Scientific Center. 2019. No. 1(387). pp. 184-196. (in Russian)

4. Schultheis S.M., Lickteig C.A., Parchewsky R. Reciprocating compressor condition monitoring. 36^thTurbomachinery Symposium. College Station. 2007. P. 10-13.

5. Mitchell J.S. From vibration measurements to condition based maintenance seventy years of continuous progress. Journal of Sound and Vibration. 2007. No. 41(1). P. 62-75.

6. Baykov I.R., Kitaev C.B., Smorodov E.A., Golyanov A.I. Refinement of the methodology for determining the technical condition of gas pumping units. Izvestiya vuzov. Energy problems. 2001. No. 3-4. pp. 3-6.(in Russian)

7. Kostyakov V.N., Naumenko A.P. Analysis of modern methods and means of monitoring and diagnostics of reciprocating compressors. Part 1. Real-time monitoring systems. In the world of non-destructive testing. 2010. No. 1 (47). pp. 64-70.(in Russian)

8. Automated compressor station SKAV-7.5. [Electronic resource]: http://www.compressor.spb.ru/ (in Russian)

9. Oskoma A.A. Statistical method of diagnosing high-pressure air compressors as an effective way to improve the safety of their operation. Interuniversity collection of scientific papers of the conference "Problems of transport safety". St. Petersburg: GMA named after Adm. S.O. Makarov, 1997. (in Russian)

10. Foliyants A.E., Martynov N.V., Bulygin A.S., Sucheninov A.P., Pilin B.P., Bilko G.I., Gorkova L.P. General technical conditions for the repair of reciprocating compressors. 1985. 362 p.(in Russian)

11. Frenkel M.I. Reciprocating compressors: Theory, designs and fundamentals of design. 2nd ed., reprint. and additional l.: Mashgiz, 1960. 655 p. (in Russian)

12. Frenkel M.I. Kolbenverdichter. Theorie, Konstruktion und Projektierung. German. Berlin: Technik, 1969. 747 р.

13. Plastinin P.I. Reciprocating compressors. Vol. 1. Theory and calculation. M.: KolosS, 2006. 456 p.(in Russian)

14. Khodyrev A.I., Shakhov A.V. Mathematical modeling of piston compressor stage malfunctions for technical diagnostics. Territory of Neftegaz. 2020. No. 1-2. pp. 46-54.(in Russian)

15. Sarmanaeva A.F. Mathematical modeling of working processes of reciprocating compressors taking into account the actual shape of the working elements of ring valves: diss. ... candidate of Technical Sciences. Kazan, 2015. 164 p.(in Russian)

16. Khodyrev A.I., Martynov V.N. Mathematical modeling of a pumping and compressor unit for pumping gas-liquid mixtures. Chemical and oil and gas engineering. 2008. No. 4. pp. 19-22.(in Russian)

17. Ravin A.A. Technical diagnostics of ship power equipment. St. Petersburg: Lan Publishing House, 2021. 240 p.(in Russian)

18. Naumenko A.P. Introduction to technical diagnostics and non-destructive testing: textbook. Stipend. Omsk: Publishing House of OmSTU, 2019. 152 p.(in Russian)

19. Myasnikov Yu.N. Reliability and technical diagnostics of ship power-mechanical systems (NTDIKA). St. Petersburg: Publishing House of the Central Research Institute named after Academician A.N. Krylov, 2008.183 p. (in Russian)

20. Mas A.O., Zhiltsov A.S., Okhonin V.A. Diagnostics of ship technical means by thermal imaging diagnostics. In the book. Marine technologies: problems and solutions. 2021. pp. 59-62. (in Russian)

21. Grishchenko D.V. Information and measurement system of operational diagnostics of ship's rotary equipment. Proceedings of the XIV International Conference "Regional Informatics-2014" (October 29-31, 2014, St. Petersburg). St. Petersburg: SPOISU, 2014. pp. 445-446.(in Russian)

22. Oskoma A.A., Surikov D.G. Innovative method (technology) of manufacturing springs as a means of improving the reliability of machines and mechanisms. Internauka. 2020. No.5(87). pp. 51-52.(in Russian)

23. Baykov I.R., Kitaev S.V., Fayrushin S.Z. Diagnostics of the technical condition of reciprocating compressors.Energy security and energy conservation. 2015. No. 3 (63). pp. 28-30.(in Russian)

24. Myasnikov Yu.N., Nikitin V.S., Rabbi A.A. Operational defects of diesel and gas turbine engines. Proceedings of the Krylov State Scientific Center. 2018. No.3 (385). pp. 85-96. (in Russian)

Read the full article